Thermagasket Head and Block Treatment Kit

Thermagasket is 2-part, Ceramic Fiber, Elemental Carbon and Iron Metallic Alloy compound. EFFECTIVELY Seals Blown Head Gaskets, Cracked Heads and or Blocks in all aluminum, steel, and cast iron engines. We will refund your money if we are not able to successfully help you with the repair. Thermagasket is the most effective blown head gasket repair on the market today! 100% effective. All orders ship within 24 hours.

• Seals your head gasket in less than 10 minutes!
• No Mechanic Needed. Do It Yourself!
• Save Thousands Over Conventional Repairs
• Developed by Automobile and Chemistry Experts

16 oz Part A Base
8 oz Part B Catalyst

CARS- 100 EFFECTIVE

Solves the following problems:

• Failing or completely failed head gasket
• Warped heads
• Cracked engine blocks and heads
• Coolant leaks between the head and block
• Intake manifold coolant leaks
• Overheating due to a cracked head or block
• Oil leaks into the cooling system (radiator)
• Coolant leaks into the oil
• Excessive steam and water from the tailpipe

Most head gasket failures are caused by engine overheating. If you’re not sure why your engine overheated, review a shortlist of the most common causes below.

What is a blown head gasket?

A blown head gasket is a breach in the gasket whose purpose is to form a gas-tight seal between the cylinder head and the engine block. This type of breach typically occurs in cars that have severely overheated. During severe overheating, the head or block warps, causing it to pull away from the gasket. The unsupported gasket fails under the high pressure of combustion or heat from the cooling system. Once the gasket is penetrated, exhaust gases escape from the cylinders into water cooling ports and often into adjacent oil ports. When this occurs, the cooling system malfunctions, resulting in the engine overheating.

What are the symptoms of a blown head gasket?

The most visible sign of a blown head gasket is steam visible from the tailpipe after the car has warmed up. However, many cars with minor damage to the head gasket don’t show any visual indicators. In this case, the cooling system must be checked for the presence of exhaust gases.

Another symptom frequently encountered is the presence of water in the oil. It appears as a milky white emulsion under the oil cap and on the dipstick.

How does Thermagasket work?

Whenever there is a breach in the head gasket, a cracked head, or a cracked block, a hot spot develops at the point of the breach. That hot spot can reach temperatures 3 to 4 times that of normal engine operating temperatures. When Thermagasket comes into contact with this superheated area, it instantly forms a perfect high-temperature seal. Once Thermagasket’s metallic alloys seal the breach, heat is deflected away from the patch, eliminating the hot spot and preserving the long term integrity of the repair.

---

What Customers Are Saying

"I recently purchased your product due to a blown head gasket on my 1994 Toyota V6 pickup with 172,250 miles on the odometer. After getting several estimates that would cost more money than the truck is worth, I decided to try your product... the truck did not smoke or overheat and now runs better than ever."
— Thomas Kern, Corona CA

"Faced with a repair bill that outweighed the price of the car, I was prepared to sell the car for scrap... After the treatment arrived I followed the instructions and was truly amazed to see the steam coming from the exhaust disappear! Now the car is running better than I ever remember it running."
— William Metzler, Higley AZ

"Faced with the options of replacing the engine with a new $2,800 dollar one, or a used one for $695 plus $500 dollars to install it... I ordered it anyway what did I have to lose... everything they said, my truck is repaired, I was truly amazed."
— Delrico Pullie, Pittsburgh PA

"Our mechanic gave us the bad news: junk the truck or pop for the $2,800 major engine repairs. Then I ran across Thermagasket... it's now mid-April and 8,000 miles later. And not a hint of a leak ever since. Your product saved us at least $2,800 in a major engine repair."
— R.G. Byrne, Marietta GA

Read more customer stories →